ขัดล้างทำความสะอาดพื้นผิวทั้งหมดด้ว

Polishing the cleaned all surfaces with clean water using a pressure water injection
.Height (pressure approx. 150 – 180 bar) or cleaned with a brush, solid transportation (do not use metallic scrubbing brush-rinse surface) or wash with water, scrub of hakboriwen for use with water-dampened cloth wiping cloth to rub Remover carbon/black/powder. Then leave to dry for at least 24 hours,
.

Scrub clean all surfaces with clean water. Using air pressure.
higher (pressure about 150 - 180 bar) or planing wash with stiff brush (do not use a metal brush to scrub the surface) or if any area with a scrub inconvenience. Use a wipe with a damp cloth to remove soot / powder / dust and leave to dry for at least 24 hours.

Clean clean the entire surface with water. Using pressure
.High pressure (about 150 - 180 bar). Cleaning brush or polishing with ice (do not use metal brush scrubbing the surface) or if any area. Clear water is convenient. Make use of wiping with wet cloth lightly, to remove the soot / powder paint.Then left to dry for at least 24 hours
.